Start with my first article in this series
BTW this is kind of a cookery show kind where they put the main course in the oven and take another finished one .I did not accomplish any of this in one day it took a lot of homework and trial runs.I read the case studies by the great Rob Coutts many times over.
For sanity we decided to use a new box for CS10.5
- Created a CS10.5 system added all the modules that we needed and connected to a dummy database and dummy EFS. Just for kicks we added some that did not exist in 971 like classifications and recman(forward thinking).Rudimentary checks to ascertain base functionality.Note all hot fixes ,patches relevant were also put.
- Cloned this server to 3 others for Front Ends and Agents.Just architectural things as after the LL installer creates the services just copy the OTHOME over ,give it distinct names etc.Sometimes if your copies are done with IIS and or any of livelink services running sometime corrupt dll copies end up so make sure you follow proper protocol.In most cases you do not need to run the optional modules installer on your 2nd to n CS servers.Most livelink needed dll’s oscript code will try to push it to windows systems folders on startup every time.
- Saved this and copied it as backups.
- It is worth verifying the DB type requirements for 10.5 for e,g your 971 DB might have been 11.2.0,2 but Cs10.5 need 184.108.40.206.these are database chores that your DBA should know. Always give lots of oracle memory like SGA etc .OT has a tech article on how it is to be done.
- Connected the binary to the prepped up 971 database.one of the first screens was the 971 box for Admin server,changed it to the new box .
- Wanted re-starts it is a good sign.One thing I do is since I know the DB Upgrade is done by a single thread I made the threads 8 on it.If you have lots of threads they indirectly add to the Oracle load.I also do my upgrades with debug=2 and wantlogs=true.It is almost impossible to live without BareTail or a good ASCII Editor.
- The other threads on it will just produce a warning message that the “upgrade is in progress”.
- Once the upgrade starts you should see the thread<nn>.out file issue oscript commands and its corresponding connect<nn>.out doing DB work.Your heart will rejoice if you have them on baretail 🙂 In my case a core upgrade will move my 971 schema(6.0.8) to CS10.5 (6.2.58).If it does that it is a successful upgrade. Times will vary depending on data and content and horsepower of your DB.Do not try to run arithmetic on the numbers does not mean continuous although looking at the db upgrade log one can see the steps.The places it breaks clues OT and even if you know Oscript you can chase a lot f them.In my case it was let’s say a very smooth upgrade.
- Since we had optional modules after the core upgrade all optional module schemas were introduced or upgraded.You should see it in bold letters in the pre upgrade page. “Your Content Server schema will Upgrade from <nn> to <nn>”.Classifications module will be introduced,Recman would be introduced(New things), ADN will upgrade from <nn> to <nn> .BTW I had to downgrade A D N to a lower one because the latest and greatest won’t cleanly co operate with the upgrade.You will not notice the difficulty if your database is new.
- The reason why OT says to upgrade OPT modules after core upgrade is it is easier for them to pinpoint the failure.
- The way livelink code works every time you re-start is it will read Opentext.ini and one of the first modules that loads is the DBWIZAPI .It will first try to ascertain whether core schema is what the binary says its is otherwise it will force a DB Upgrade.Before releasing the software to listen to request on 2099(suggested default),it will enumerate the module section ini to the schema section INI. So if one box had a schema aware module such as form and its INI said 2.0.4 and this box’s form module said 2.0.3 it will trigger the familiar error “You have blah blah in database but blah blah module is lower/higher”.That is the whole reason why experienced people and nowadays OT says get one server(Anchor) done correctly and clone that on other boxes.So whether you install opt modules after or before livelink code always checks this every time you re-start.
- The Admin Service left running on any box is no problem.It contains java code to talk to the search server.Also memcached is dependent on Admin Service.I don’t really know what cluster agent does but it is OT’s answer to smart patching.Once you resister a Admin server to the database that is when the box can be used for certain things like augmenting search.
- We had to create a search as advised by OT so that items would come out indexed faster.I am always amazed at the search code but unfortunately one cannot see it completely as Oscript just talks to the java code.Perhaps if I had time and code was de compilable( I seriously doubt it,I have a feeling java is talking to C++ compiled code internally,how else would it scale so well).To have people always complain about search ….
- I installed all our custom modules created clones of this and called it many different roles and we were pleasantly done
- The rest was mainly releasing it to customers to test have their suggestions and voila…